Vorco supplies Polycom handsets for SkyPhone and SkyPhone Premium. They will arrive at your site ready to be connected, you don't need to enter any configuration details into the phone.

The desk phone must be connected to power and the network. By default, Vorco expects that your network supports Power over Ethernet (PoE) which means a single cable into the correct port on your phone connects it to both power and network. If your network does not support PoE, please contact your Vorco account manager to arrange power packs for each phone.

Connect the Network
Connect the network cable from your wall jack point or network switch to the port marked on the images below:

Connect the Handset
Connect the phone handset to the port marked on the images below:

Connect the Bridge Port (optional)
Your computer can get network access through the phone instead of being connected directly to another wall jack or switch port. You can plug your computer into the ports marked on the images below:

Did this answer your question?